Construction Guidance for China Marmoglass

Protection of surface protective film: the surface protective film pasted on exposed work can resist pollution and prevent scratching by sand grains. And marmoglass can be removed only after the completion of the project and after being thoroughly cleaned.

Marmoglass Cutting: Marmoglass has a high hardness and density, with a jade-like texture. Therefore, a diamond saw blade will be worn, thus even causing damage in cutting. Therefore, the following measures should be taken when cutting: Give priority to a stable cutting machine with a brand-name diamond sea blade for marmoglass. If unavailable, a marble cutter (a granite machine is not applicable) with a diamond saw blade can be used. Ensure sufficient cooling water to prevent damage or explosive disruption to the saw blade caused by overheating. Always keep the saw blade facing forward and draw it back after tiles have been removed to prevent accidental damage to marmoglass when returning. Handheld electric marble is hard to operate and should be operated by trained and experienced workers. Ensure cooling water is ejected, aiming at the cutting position all the time. Cut a shallow slot first as a guilding slot for following cutting to ensure smooth cutting and avoid damages caused by swinging of the blade. Due to high wearing of cutting edge, the blade should be edged timely to ensure the sharpness of the diamond cutting edge. No matter which cutter you choose, excellent edging materials should be ensured. A common refractory fireclay block is also recommended.

Laying: Organic glue with appropriate flexibility is recommended to bind the tiles.

Application of the traditional slush technique when laying on the floor may cause cracks in some tiles. In view of this, improving measures are as follows: About the cement, plain cement should be applied with 275# white cement and a little 107# liquid emulsion if necessary. Laying use of beneficial use clay ( tiles adhesives, advanced waterproof tiles paste )

1. As a waterproof coating, use: Pro Rate the adhesives Water = (2.5-3.0): 1 reconciliation ratio; stir after 10 minutes before brushing. When bushing, it required the thickness uniform, not missing until after thickness of about 1.0 mm or so, (1.0-2.0)kgs/m2; have special requirements for certain positions, can be used to enhance non-woven glass fiber cloth with thickness of about (2.0-2.5) kg/m2

2. As a bonding material (and waterproof effect): Pro Rate: the adhesives: water = 10: 3 ratio about reconciliation, stirring after 15 minutes can be used. Can be as tiles, ceramic tiles and other materials, like the direct smear paste, paste layer thickness should be kept large (0.5-3.0)mm between the suitable. An approach with ordinary cement paste elements, like a super adhesive force, also has water resistance.

3. Before filling the beechwork joint, it should be thoroughly cleaned. Paste the four sides of the marmoglass tiles along the joints with color-protective paper and then carry out the operation with appropriate filler.China Marmoglass is the leading manufacturer of the new Marmoglass in south China.